REPAIR TOOL KITS

Tools and equipment to repair any smartphone or mobile cell phone is a kind of investment. It is better to buy good quality mobile phone repairing tools than buying cheaper and poor quality tools. There are manufacturers who manufacture tools and tool kits of good quality. These can be little expensive but you will get complete satisfaction and value for money after using them.

 

When buying tools and tools kit for repairing smartphone, it is extremely important to keep in mind that most parts inside any smartphone are very sensitive to ESD or Static Electricity. Hence, I suggest buying only ESD-Safe tools and equipment for repairing smartphones. You can buy each tool individually or buy a complete tool kit.

Here is complete list of tools and equipment

needed to repair smartphones

   
  1. Soldering Iron or Soldering Station: Buy a good quality ESD-Safe soldering iron or soldering station to solder parts and components like capacitor, resistor, diode, transistor, regulator, speaker, microphone, display etc. Hakko and Weller are two world renowned manufacturers of soldering irons and other soldering tools and equipments.
  2. Cleaning Sponge: This is used to clean tip of soldering iron while soldering.
  3. Hot Air Blower: Also called SMD (Surface Mount Device) rework system and SMD repair system. It has control to regulate or manage temperature and flow or hot air. Always buy a good quality ESD-Safe hot air blower. It is used to remove and again solder ICs.
  4. PCB Holder / PCB Stand: A PCB (Printed Circuit Board) holder or PCB Stand is used to hold the PCB of a mobile phone while soldering or repairing.
  5. Solder Wire and Flux: Solder wire is used to solder electronic components, ICs etc. Flux is applied before soldering to remove any oxide or contamination at the solder joints. Buy good quality solder wire and No-Clean Flux.
  6. Solder Paste: This is solder in molted semi-solid form. It looks like paste. Solder paste is mainly used for Reballing of ICs.
  7. Desoldering Wire: Desoldering wire or Desolder wire is used to remove excess solder from track of PCB. Chemtronics is world renowned manufacturer and supplier of Desoldering wire.
  8. Thinner or PCB Cleaner: Thinner or PCB cleaner is used to clean the PCB of a mobile phone. The most common PCB cleaner used in mobile phone repairing is IPA or Isopropyl Alcohol.
  9. Jumper Wire: This is a thin laminated or coated copper wire used to jumper from one point to another on the track of a mobile phone while repairing. Most people doing the work of mobile repairing do jumper to solve many problems.
  10. Point Cutter: It is used for cutting wires etc.
  11. Precision Screwdriver: Used to remove and tighten screws while assembling and dissembling a mobile phone. Precision screwdrivers of sizes T4, T5, T6 and four head are good for most mobile repairing job.
  12. Tweezers: To hold electronic components, ICs, jumper wire etc while soldering and desoldering.
  13. ESD-Safe Cleaning Brush: Used for cleaning the PCB of a mobile phone while repairing.
  14. Multimeter: Used to find faults, check track and components.
  15. Battery Booster: It is used to boost the power of battery of a mobile phone.
  16. Ultrasonic Cleaner: Used to clean PCB of a mobile phone and electronic components.
  17. BGA Kit: Used to Reball and repair ball-type ICs. BGA stands for Ball Grid Array.
  18. Magnifying Lamp: It is used to see the magnified view of the PCB of a mobile phone. Most magnifying lamps also have light. Magnifying lamps are available in different magnification such as 3x, 4x, 5x, 10x, 50x etc.
  19. Mobile Opener: These are used to open the housing or body of a mobile phone.
  20. DC Power Supply: Regulated DC (Direct Current) power supply is used to supply DC current to a mobile phone. Most repair person used DC power supply to switch ON a mobile phone without battery.

FEATURED PRODUCTS

Electronic Devices Precision Repair Tools Kit Set For Laptops & Smartphones
If you want to do DIY repairs at home on your electronic devices, you need to have the right tools of the trade on hand. The Multipurpose 38-Piece Precision Screwdrivers Repair Tool Set gives you all of the essential screwdrivers that you could possibly require to open and make repairs to a wide variety of gadgets and devices.

 

Some Screwdriver Applications:

  • T3 T4, T5, T6, T7, T8, remove computer and mobile phone casing
  • T4, T5: laptops hard drives and circuit board
  • T7: Parts of Motorola mobile phones
  • T8: Parts of Motorola mobile phones and Sony Ericsson mobile phone & XBOX
  •  Laptops and mobile phones with the Phillips screwdrivers such as: HTC, Samsung, Apple, etc.
  •  etc., the most common household tools.

Price: $45.00

 

SMD Rework Soldering Station Hot Air Gun

Solder Iron Welder 2in1 ESD 11 Tips BGA

 

Ready for Your Business Now!!

This is a brand new 2in1 SMD Rework Soldering Station 898D+ which is improved from 878 series and inherited all advantages. Alloy metal body with high-quality silicone shell features elegant appearance and power saving. You can use hot air gun and soldering iron separately, with no interference with each other. SAMSUNG chip control circuit adopted, it ensures rapid warming-up and stable accurate temperature control which at the same time not affected by airflow to really achieve lead-free soldering and desoldering. Especially suitable for mounting and reworking SMD components by hand. Really a must have!

Package Includes:

  • 1x 2in1 Soldering Station Unit
  • 1x Hot Air Gun
  • 1x Hot Iron
  • 1x Stand
  • 1x Holder
  • 1x Spanner
  • 1x IC Extractor
  • 1x Sponge
  • 3x Nozzles
  • 1x Desoldering Wick
  • 11x Iron tips
  • 1x Manual

SKU: 898D+
Price: $259.00

 

 

 
 
Pocket / Digital Multimeter
 
Pocket Digital Multimeter • Auto Ranging • 600V CAT III / 1000V CAT II • Frequency • Capacitance
Part No: MAJ MT855
 

Overview

  • 600V CAT III / 1000V CAT II
  • Auto Ranging
  • Frequency
  • Capacitance

Features

  • Auto Ranging DMM
  • Capacitance Measurement
  • Measures Resistance up to 40MΩ
  • Measures AC and DC Voltage to 500V
  • Frequency Measurement
  • Continuity Buzzer and Diode Test
  • Integrated Test Leads with Holder
  • Data Hold
  • Relative Mode
  • Auto Power Off

Price: $95.00

 

CXD99(58W) STATION

 

CXD99(58W) STATION

Temperature Control Adjustable 100°C ~ 450°C 58W Soldering Station
 
Temperature Control Soldering Station • Adjustable 100°C ~ 450°C • 58W
Part No: CXD99(58W) STATION
 
Features
On-off switch with power-on indicator light
Safely guard iron holder
Replaceable Tips
Additional Information
Power    58W
 

Price: $79.00

 
 
Electrician Tool Pouch/Kit
 

Includes:

  • Leather Tool Pouch/Belt
  • Electrical Tape (19mm x 5 Meters)
  • Side Cutter w/Crimper
  • Heavy Duty Long-Nosed Plier
  • 9.5 inch Crimper Plier
  • Electricains Knife (stainless steel)
  • Tape measure w/Magnet in Tip - 25 Feet
  • Groove Joint Plier
  • Precision Wire Stripper AWG: 10, 12, 14, 16, 18, 20
  • Cable Ties
  • Receptacle Tester - GFCI Outlets
  • Screwdriver (4) - Rubber Grip
    • Philips: #2 x 4 inch
    • Flat: 1/4 Inch x 4 inch
    • Flat: 3/64 inch x 6 inch
    • Flat: 1/4 inch x 8 inch

Price: $225.00

 

HDTV Video RF Coaxial Cable Tool Kit

New HDTV tool kit designed for the HDTV technician
 

 

HDTV Video RF Coaxial Cable Tool Kit

This HDTV tool kit is a professional grade tool kit for cutting, stripping, crimping and testing coaxial cable connections of HDTV, video and RF communications.

Features:

  • All-in-One Toner & Probe kit offers traces and locates cables quickly and easily.
  •  The new Pro-Crimpers with 6 die sets for most HDTV, CATV applications.
  • Forged Cable Cutter for cutting aluminum and copper cables up to 25mm.
  • Rotary Coaxial Cable Strippers for RG58/59/62/6/3C/3C2V/4C/5C

Price: $295.00

 

Kaisi 16-Piece Precision Screwdriver Set

Repair Tool Kit for iPad, iPhone & Other Devices

(Kaisi 16 Piece)

 

 

  • 16 tools necessary to repair your iPad, iPhone, iPod, Samsung Galaxy products, and other devices
  • Allows you to take apart your mobile devices without damage to the tablet or phone cover
  • Rubberized, anti-slip handle allows for a firm grip to prevent slippage during use

Price: $24.95

 

 

LED Headband Magnifier

Build-in 3 lens multiplying power from 1.5x 3x 8.5x 10x

battery not included

SKU: CRT81007
Microscope
Other Accessories and Gadget

Price: $49.95

 

High Power Programmable DC Power Supply 3305P

( DC Output up to 32V )

This is high power programmable DC power supply
current Range 0-5A
switchable between 110/220V
maximum DC output voltage to 32V /5A/160W

SKU: CRT3305P
DC Power Supply

Price: $359.00

 

LAN Data Installer's Kit 

(Eclipse 500-021)

 

LAN Data Installer's Kit

New! LAN Data Installer's Kit complete with LAN tester and remote.
 
* Punchdown Tool with two blades (110 and 66 Styles) 
* Ratcheted modular plug crimper 
* LAN tester with remote (RJ45/BNC cables)
* UTP stripper 
* Assorted modular plugs and boots 
 
Order your LAN Data Installer's Kit today!
 

Price: $225.00

 

Electronic Heavy Duty Heat Gun

SKU: CRT-8033
Digitizer Separator / Accessories
Heat Gun / Hot Air / Board Holder
Hot Air / Soldering Rework Station

Price: $39.95

 

Selfie Camera Tool with BT Remote

 

This selfie camera tool will work every brand except HTC.with Bluetooth remote connect to your phone for camera shot.

SKU: CRT3065PK
Other Accessories and Gadget

Price: $49.95

 

ACHI IR-PRO-SC IR BGA Rework Soldering Machine 

 

1)IR-PRO-SC is also called PRO SC or IR-PRO-SC, it is a IR BGA rework station using advanced DARK INFRARED TECH.
Convertor and I highly recommend the LITEFUZE VT-3000 or VT-5000 which ive used personally for over a year with no issues.

2)Can be used to repair CBGA, CCGA, CSP, QFN, MLF, PGA and all the green epoxy type μBGA.
3)The Pro-SC is designed for rework of the following but not limited to, PC motherboard, laptop motherboard, Cisco Switches,Xbox360 and PS3.

 

Disclaimer: Please note that the listing picture is for represenataion purposes only. This item ships directly from the manufacturer and as such the manufacturer may make small changes and revisions without notice. You will receive the item and model you ordered, it just may have newer features and or better components that differ slightly from the picture listed.

 

Price: $1250.00

 
 
iPhone, iPad & iPod Tool Kit

 

Use this kit to repair Apple products like the iPhone, iPad, and iPod. 16 tools allow you to take apart mobile devices without damage to the tablet or phone cover.
 

Use this kit to repair Apple products like the iPhone, iPad, and iPod. 16 tools allows you to take apart your mobile devices without damage to the tablet or phone cover. Rubberized, anti-slip handle allows for a firm grip to prevent slippage during repairs.

  • SIM card tray ejection tool
  • 12 fastener bits
  • 2 Polyoxymethylene (POM) opening levers to access parts inside the housing
  • Suction Cup - use to remove Apple touch screens without leaving marks on device
  • Prying Paddle - use to open case without scratching the cover

Price: $49.95

 

Subscribe To Our Tech Blog

* indicates required
Print Print | Sitemap
© Smartphone Repair Training Courses